Details
TE100-S8 is an Auto-MDIX switch designed specifically to boost network performance by eliminating network congestions and unnecessary network traffics. Each port on the Switch provides dedicated bandwidth and can negotiate between 10/100Mbps network speeds and half/full duplex modes. Plug-N-Play provides cost-effective and high performance solutions.
- 8 10/100Mbps Auto-Negotiation; Auto-MDIX Fast Ethernet RJ-45 ports
- Compliant with IEEE 802.3 / IEEE 802.3u standards
- IEEE 802.3x Flow Control support
- Provide 1K MAC address entries
- Compliant with Windows; Linux; and Mac Operating Systems.
- Store-and-Forward Switching method
- Non-blocking Architecture
- Diagnostic LEDs
- Plug and Play
Standards: IEEE 802.3 10Base-T; IEEE 802.3u 100Base-TX; IEEE 802.3x Flow Control
Network Media: Ethernet: UTP/STP Cat. 3;4;5; EIA/TIA-568 100-ohm; Fast Ethernet: UTP/STP Cat. 5. 5E; EIA/TIA-568 100-ohm
Data Rate: Ethernet: 10Mbps/20Mbps (Half/Full-Duplex)Fast ; Ethernet: 100Mbps/200Mbps (Half/Full-Duplex)
Switch Fabric: 1.8Gbps Forwarding Capacity
Topology: Star
Interface: 8 10/100Mbps Auto-MDIX RJ-45 Ports
Filtering Table: 1K Entries per device
Power Consumption: 2.8 watts (max)
Diagnostic LED: Power; Link/ACT; 100Mbps
Power Adapter: Switching Power 5V DC 800mAor; Linear Power 7.5V DC 1A"
- 8 10/100Mbps Auto-Negotiation; Auto-MDIX Fast Ethernet RJ-45 ports
- Compliant with IEEE 802.3 / IEEE 802.3u standards
- IEEE 802.3x Flow Control support
- Provide 1K MAC address entries
- Compliant with Windows; Linux; and Mac Operating Systems.
- Store-and-Forward Switching method
- Non-blocking Architecture
- Diagnostic LEDs
- Plug and Play
Standards: IEEE 802.3 10Base-T; IEEE 802.3u 100Base-TX; IEEE 802.3x Flow Control
Network Media: Ethernet: UTP/STP Cat. 3;4;5; EIA/TIA-568 100-ohm; Fast Ethernet: UTP/STP Cat. 5. 5E; EIA/TIA-568 100-ohm
Data Rate: Ethernet: 10Mbps/20Mbps (Half/Full-Duplex)Fast ; Ethernet: 100Mbps/200Mbps (Half/Full-Duplex)
Switch Fabric: 1.8Gbps Forwarding Capacity
Topology: Star
Interface: 8 10/100Mbps Auto-MDIX RJ-45 Ports
Filtering Table: 1K Entries per device
Power Consumption: 2.8 watts (max)
Diagnostic LED: Power; Link/ACT; 100Mbps
Power Adapter: Switching Power 5V DC 800mAor; Linear Power 7.5V DC 1A"